AOG and Fire Magic: same family
AOG comes from Robert H. Peterson Co. in the City of Industry, the same company behind Fire Magic. AOG is positioned as the simpler, more affordable line. You get solid stainless construction from a manufacturer that's been building grills locally for a long time, without some of the high-end features on Fire Magic.
AOG grills are usually identified by series (the L-Series and T-Series are common) and width, such as 24, 30 or 36 inches, in built-in, cart and post-mount versions. Being local, they're everywhere in Southern California, including many builder-installed outdoor kitchens from the last couple of decades.
Common repairs on AOG grills
- Ignition. Igniters that stop sparking, worn electrodes and wires, and dead batteries in the ignition module on models that use them. See igniter replacement.
- Burners. Older burners eventually corrode or crack. Uneven flame or yellow flame tips are the usual signs. Our guide on signs burners need replacing helps.
- Valves and knobs. Stiff valves and knobs that don't seat properly.
- Heat distribution parts. Briquette trays or flame tamers that warp or rust through.
- Rotisserie and back burners on models that have them.
Cleaning an AOG
We pull the grates, heat distribution parts and burners, clear the burner ports, and scrape and degrease the firebox using a biodegradable cleaner. The grease tray and drip path get cleaned so they drain properly. We check every burner for flame quality and every igniter for spark before putting things back together. Rinse water is captured and taken away. The stainless gets a with-the-grain polish. The full process is laid out at grill cleaning.
Parts and replacement
Because AOG and Fire Magic share a manufacturer, parts for many AOG grills are well supported and easy to get. Older AOG grills sometimes need parts that have been superseded by newer versions, which usually fit. The rating label is usually on the grill body, often visible when the drip tray is out or under the front. If an older AOG is rusting out in multiple places, we can supply and install a new grill matched to your cutout. Our repair or replace guide lays out how to decide.
AOG grills are also common on carts and post mounts around pools and patios. The same internals apply, but carts deserve a look inside the cabinet, where drips collect and rodents like to nest near the hose and regulator.
AOG questions
Are AOG and Fire Magic parts interchangeable?
Some are similar, but don't assume they swap. We order by model number to get the right fit.
Is an AOG worth repairing?
Usually, yes. The bodies are durable stainless, and burners, igniters and valves are replaceable. Replacement makes sense when the firebox itself is rusting through.
Are you an AOG authorized service center?
No. We're an independent, insured grill service company. Warranty claims go to the manufacturer.
Can you convert my AOG from propane to natural gas?
Often, yes, using the correct conversion parts for the model. See propane to natural gas conversion.
Related guides
Signs Your Burners Need Replacing
How to tell a dirty burner from a worn-out one, with flame patterns to watch for and a safe way to pull and inspect them.
Buying adviceRepair or Replace Your Grill?
A practical way to decide whether your grill needs a few parts or a replacement, based on what techs actually check first.
Care & how-toFinding Your Grill's Model and Serial Number
Where grill makers hide the rating plate, how to read it when it's faded, and what to do if it's gone. Saves time and wrong parts on any repair.
Buying advicePremium Grill Brands Compared
A fair, service-side look at the premium built-in grill brands common in Los Angeles backyards, and what to weigh when choosing between them.
Book AOG service
Call or text, or send a couple of photos and the model number, and we'll get back to you with a quote.
